 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Document 541-1 Shielded Power Inductors - LPS3314 Series * Very low DCR; excellent current handling * Miniature 3.3 x 3.3 mm footprint; less than1.4 mm tall Designer's Kit C330 contains 3 each of all values Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 44.1 - 46.5 mg Ambient temperature -40C to +85C with Irms current, +85C to +125C with derated current Storage temperature Component: -40C to +125C. Packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7reel; 3500/13 reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 1.52 mm pocket depth Recommended pick and place nozzle OD: 3.3 mm; ID: 1.65 mm PCB washing Only pure water or alcohol recommended Inductance2 Part number1 LPS3314-102ML_ LPS3314-222ML_ LPS3314-332ML_ LPS3314-472ML_ LPS3314-562ML_ LPS3314-682ML_ LPS3314-822ML_ LPS3314-103ML_ LPS3314-153ML_ LPS3314-183ML_ LPS3314-223ML_ LPS3314-333ML_ LPS3314-473ML_ LPS3314-563ML_ LPS3314-683ML_ LPS3314-823ML_ LPS3314-104ML_ LPS3314-124ML_ LPS3314-154ML_ LPS3314-184ML_ LPS3314-224ML_ LPS3314-334ML_ LPS3314-474ML_ LPS3314-564ML_ LPS3314-684ML_ LPS3314-824ML_ LPS3314-105ML_ LPS3314-155ML_ 1.0 2.2 3.3 4.7 5.6 6.8 8.2 10 15 18 22 33 47 56 68 82 100 120 150 180 220 330 470 560 680 820 1000 1500 DCR SRF max3 typ4 20% (H) (Ohms) (MHz) 0.062 0.100 0.145 0.175 0.220 0.240 0.270 0.330 0.440 0.575 0.720 0.920 1.40 1.55 1.80 2.00 2.75 3.45 4.10 4.80 6.00 9.30 12.0 14.0 18.5 24.0 31.0 44.0 215 140 115 86 74 72 60 55 45 37 34 27 22 19 17 14 13 11 10 9.0 7.0 6.0 4.5 4.5 4.0 3.7 3.0 2.7 Isat (A)5 10% 20% 30% drop drop drop 1.8 1.3 1.1 0.97 0.92 0.87 0.58 0.56 0.46 0.44 0.44 0.30 0.28 0.26 0.22 0.20 0.19 0.19 0.16 0.14 0.14 0.11 0.080 0.095 0.092 1.9 1.4 1.2 0.99 0.95 0.90 0.75 0.66 0.56 0.51 0.48 0.38 0.33 0.30 0.26 0.24 0.23 0.21 0.19 0.17 0.16 0.12 0.11 0.105 0.100 2.0 1.5 1.3 1.0 0.98 0.91 0.78 0.70 0.59 0.54 0.49 0.40 0.34 0.31 0.29 0.26 0.24 0.22 0.20 0.18 0.17 0.13 0.11 0.11 0.105 Irms (A)6 20C 40C rise rise 1.6 1.2 1.0 0.90 0.82 0.82 0.70 0.65 0.62 0.52 0.45 0.43 0.35 0.32 0.30 0.29 0.24 0.22 0.20 0.19 0.16 0.13 0.12 0.11 0.095 2.10 1.60 1.35 1.25 1.10 1.10 1.00 0.87 0.82 0.68 0.60 0.58 0.47 0.42 0.40 0.39 0.32 0.30 0.27 0.25 0.22 0.18 0.16 0.145 0.125 1. Please, specify termination and packaging codes: LPS3314-105MLC Termination: L = RoHS compliant silver-palladiumplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C= 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B= Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D= 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Ad using an Agilent/HP 4263B LCR meter or equivalent. Inductance at 1 MHz is the same for parts with SRF 10 MHz. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25C ambient. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. 0.086 0.099 0.100 0.085 0.110 0.090 0.099 0.100 0.082 0.100 0.080 0.086 0.090 0.060 0.080 Specifications subject to change without notice. Please check our website for latest information. Document 541-1 Revised 08/05/09 (c) Coilcraft, Inc. 2009 Document 541-2 Shielded SMT Power Inductors - LPS3314 Series Typical L vs Frequency 10000 1000 H 330 H Typical L vs Current 10000 1000 H 330 H 1000 1000 Inductance (H) 100 100 H 33 H Inductance (H) 100 100 H 33 H 10 10 H 3.3 H 10 10 H 3.3 H 1 1 H 1 1 H 0.1 0.01 0.1 1 10 0.1 0.01 0.1 1 10 Frequency (MHz) Current (A) 0.130 0.004 3,30 0,10 Current Derating 120 110 Percent of rated current 100 90 80 70 60 50 40 20 10 0 -40 -20 25C XXX X Dash number Internal code 0.130 0.004 3,30 0,10 Winding direction Recommended Land Pattern 0.0512 0.004 1,30 0,10 0.098 2,50 0.024 0,60 45 typ 30 Isat Irms 0 20 40 60 80 100 120 140 Ambient temperature (C) 0.104 2,65 0.063 1,60 0.098 2,50 0.146 3,70 0.063 1,60 Dimensions are in inches mm 0.063 1,60 0.104 2,65 0.146 3,70 Specifications subject to change without notice. Please check our website for latest information. Document 541-2 Revised 08/05/09 (c) Coilcraft, Inc. 2009 |
Price & Availability of LPS3314-472ML
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |